If the measured temperature is lower than the minimum threshold value, the PCM sets DTC P0113.(In this case, the input signal voltage is the maximum threshold vaue.)
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal check, high. | 1. Poor connection 2. Open or short to power in signal circuit 3. IATS | |
Enable Conditions | Case 1 |
•
ECT at Start greater than or equal to -30 ℃(-22 °F). | |
Case 2 |
•
(A) ECT at Start less than -30 ℃(-22 °F).
•
(B) ECT greater than 70 ℃(158 °F).
•
(C) Air mass less than 20 kg/h.
•
(D) Vehicle speed less than 6.2 mph(9.97 km/h).
•
After sum of (A) and (B) and (C) and (D) for 10 sec. | ||
Threshold Value |
•
Voltage greater than 4.93 V(less than -34.8 ℃/-30.64 °F). | ||
Diagnostic Time |
•
Continuous. | ||
Mil On Condition |
•
2 driving cycles. | ||
