The PCM judges external input signal in condition that a change of water temperature output value is over 1V then the PCM sets DTC P0119.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Noisy signal check. | 1. Poor connection 2. Damaged wiring 3. ECTS |
Enable Conditions |
•
Elasped time greater than 6 sec. | |
Threshold Value |
•
Variation of ECT sensor voltage greater than 1V within 2 sec. | |
Diagnostic Time |
•
Immediate. | |
Mil On Condition |
•
2 driving cycles. |
