3.
Measure resistance between Pin No.1(Power) terminal and Pin No.2(Signal) terminal of the Front Wheel Speed Sensor. (Component Side)
Specification :
Temperature | Resistance(kΩ) |
20 | 466 kΩ |
Fig.1) Resistance of Front Wheel Speed Sensor
IG Key "OFF".
Disconnect Front Wheel Speed Sensor connector.
Measure resistance between Pin No.1(Power) terminal and Pin No.2(Signal) terminal of the Front Wheel Speed Sensor. (Component Side)
Temperature | Resistance(kΩ) |
20 | 466 kΩ |
Fig.1) Resistance of Front Wheel Speed Sensor
IG Key "OFF".
Disconnect Rear Wheel Speed Sensor connector.
Measure resistance between Pin No.1(Power) terminal and Pin No.2(Signal) terminal of the Rear Wheel Speed Sensor. (Component Side)
Specification : Approx. 3.899 MΩ
Temperature | Resistance(kΩ) |
20 | 3.89MΩ |
Fig.2) Resistance of Rear Wheel Speed Sensor
Does the WSS operate properly and is the measured resistance within specification? (Check variation)
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ Carefully re-do this troubleshooting guide steps. ▶ If problem still occurs, replace WSS and then go to "Verification of Vehicle Repair" procedure. |
