If the sensor input signal is lower than 0.2V, the PCM sets DTC P0192.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
High pressure sensor output voltage too low | 1. Poor connection 2. Short to ground in signal circuit 3. FRPS |
Enable Conditions |
•
IG ON | |
Threshold Value |
•
Sensor output voltage less than 0.2 V(0 Mpa/0 psi/0 bar) | |
Diagnostic Time |
•
Continuous | |
Mil On Condition |
•
2 driving cycles |
