Checking fuel pump relay circuit continuously under detecting condition, if open or short in the circuit is detected PCM sets DTC P0230.
※ In addition, Take note that open circuit in Main Relay may cause this P0230 code.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Signal Low or High | 1. Poor connection 2. Open or short in fuel pump relay circuit 3. Open in Main Relay circuit 4. Fuel pump relay 5. PCM |
Enable Conditions |
•
Battery Voltage equal to or greater than 11V and equal to or less than 16V | |
Threshold Value |
•
Open or short | |
Diagnostic Time |
•
Continuous | |
Mil On Condition |
•
NO MIL |
