13575486-13575487

Specification

Charging System

Alternator

ltem		Specification
Nominal output		13.5V, 130A
Speed in use		1,000 ~ 18,000 rpm
Voltage regulator		IC Regulator built in type
Regulator Setting Voltage	External mode	Refer to below graph
Regulator Setting Voltage	Internal mode	14.55 ± 0.3V
Temperature Gradient	External mode	0 ± 3 mV / °C
Temperature Gradient	Internal mode	-3.5 ± 2mV / °C
Target voltage data (COM)	Frequency (Hz)	115 ~ 500
	Signal type	PWM
	Voltage level (V)	High: 3.5 ± 0.2 Low: 1.5 ± 0.2
Electric load (FR)	Frequency (Hz)	250 ± 38
	Signal type	PWM
	Current limitation from vehicle (mA)	2.7 ~ 7.0

※ Regulator Setting Voltage (External mode)

Battery

▷ AGM70L-DIN: ISG

Item	Specification
Capacity [20HR/5HR] (AH)	70/56
Cold Cranking Amperage (A)	760 (SAE) / 608(EN)
Reserve Capacity (Min)	120

▷CMF68L-BCI

Item	Specification
Capacity [20HR/5HR] (AH)	68/54
Cold Cranking Amperage (A)	600 (SAE) / 480 (EN)
Reserve Capacity (Min)	110

▷MF68L-BCI : Openable (For Middle East)

Item	Specification
Capacity [20HR/5HR] (AH)	68/54
Cold Cranking Amperage (A)	600 (SAE) / 480 (EN)
Reserve Capacity (Min)	113

caution

●

Model type description

●

Cold Cranking Ampere (CCA): Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures.

The rating is the number of amps a new, fully charged battery can deliver at -18 °C(-0.4 °F) for 30 seconds, while maintaining a voltage of at least 7.2 volts for a 12 volt battery.

The higher the CCA rating, the greater the starting power of the battery.

●

RESERVE CAPACITY (RC) : Reserve Capacity is a battery industry rating, defining a battery's ability to power a vehicle with an inoperative alternator or fan belt.

The rating is the number of minutes a battery at 26.7 °C(80 °F) can be discharged at 25 amps and maintain a voltage of 10.5 volts for a 12 volt battery.

The higher the reserve rating, the longer your vehicle can operate should your alternator or fan belt fail.

Starting System

Starter [ISG Type]

Item		Specification
Rated voltage		12 V, 1.8 kW
The number of pinion teeth		13
Performance	Ampere	Max. 100 A
[No-load, 11.5 V]	Speed	Min. 2,390 rpm

Starter [NON-ISG Type]

Item		Specification
Rated voltage		12 V, 1.7 kW
The number of pinion teeth		11
Performance [No-load, 11 V]	Ampere	Max. 70 A
	Speed	Min. 2,300 rpm

Preheating System

Glow Plug

Item		Specification
Type		Metal
Rated voltage (V)		11 (20°C)
Operating voltage range (V)		5 ~ 11 (20°C)
Resistance (Ω)	Normal	0.4 ~ 10 [20 ~ 30 °C (68 ~ 86 °F)]
	Open	Over 10 [20 ~ 30 °C (68 ~ 86 °F)]
	Short	Below 0.4 [20 ~ 30 °C (68 ~ 86 °F)]

Glow Relay

Item	Specification
Rated voltage (V)	12
Operate voltage (V)	8 ~ 15

Tightening Torques

Item	N.m	kgf.m	lb-ft
Alternator mounting bolt	38.2 ~ 58.8	3.9 ~ 6.0	28.2 ~ 43.4
Alternator B-terminal cable mounting nut	9.8 ~ 14.7	1.0 ~ 1.5	7.2 ~ 10.8
Battery (+) terminal tightening nut	7.8 ~ 9.8	0.8 ~ 1.0	5.8 ~ 7.2
Battery (-) terminal tightening nut	3.9 ~ 5.9	0.4 ~ 0.6	2.9 ~ 4.3
Battery mounting bracket mounting bolt	8.8 ~ 13.7	0.9 ~ 1.4	6.5 ~ 10.1
Battery tray mounting bolt	8.8 ~ 13.7	0.9 ~ 1.4	6.5 ~ 10.1
Battery sensor cable mounting bolt	26.5 ~ 32.4	2.7 ~ 3.3	19.5 ~ 23.9
Starter mounting bolt	49.0 ~ 63.7	5.0 ~ 6.5	36.2 ~ 47.0
Glow plug plate mounting nut	1.3 ~ 2.0	0.13 ~ 0.20	0.96 ~ 1.48
Glow plug	15.0 ~ 20.0	1.5 ~ 2.0	11.0 ~ 14.8