13575505-13575506

Specification

Ignition System

Ignition Coil

Item	Specification
Primary Coil Resistance (Ω)	0.79 ± 15％ [20℃ (68℉)]
Secondary Coil Resistance (kΩ)	5.9 ± 15％ [20℃ (68℉)]

Spark plug

Item

Specification

Type

SILZKR6B10E

Gap

0.9 ~ 1.0 mm

(0.035 ~ 0.039 in.)

Condenser

Item	Specification
Capacitance (uF)	0.47 [1KHz]
Insulation resistance (MΩ)	1,000 [DC 500 V/1 Min]

Charging System

Alternator

ltem		Specification
Nominal output		13.5V, 110A
Speed in use		1,000 ~ 18,000 rpm
Voltage regulator		IC Regulator built in type
Regulator Setting Voltage	External mode	Refer to below graph
Regulator Setting Voltage	Internal mode	14.55 ± 0.3V
Temperature Gradient	External mode	0 ± 3 mV / °C
Temperature Gradient	Internal mode	-3.5 ± 2mV / °C
Target voltage data (COM)	Frequency (Hz)	115 ~ 500
	Signal type	PWM
	Voltage level (V)	High: 3.5 ± 0.2
	Voltage level (V)	Low: 1.5 ± 0.2
Electric load (FR)	Frequency (Hz)	250 ± 38
	Signal type	PWM
	Current limitation from vehicle (mA)	2.7 ~ 7.0

※ Regulator Setting Voltage (External mode)

Battery

Battery

▷ CMF60L-BCI

Item	Specification
Capacity [20HR / 5HR] (AH)	60 / 48
Cold Cranking Amperage (A)	550 (SAE) / 440 (EN)
Reserve Capacity (Min)	92

▷AGM70L-DIN: ISG

Item	Specification
Capacity [20HR / 5HR] (AH)	70 / 56
Cold Cranking Amperage (A)	760 (SAE) / 608 (EN)
Reserve Capacity (Min)	120

caution

●

Model type description

●

Cold Cranking Ampere (CCA): Cold Cranking Amps is a rating used in the battery industry to define a battery's ability to start an engine in cold temperatures.

The rating is the number of amps a new, fully charged battery can deliver at -18 °C(-0.4 °F) for 30 seconds, while maintaining a voltage of at least 7.2 volts for a 12 volt battery.

The higher the CCA rating, the greater the starting power of the battery.

●

RESERVE CAPACITY (RC) : Reserve Capacity is a battery industry rating, defining a battery's ability to power a vehicle with an inoperative alternator or fan belt.

The rating is the number of minutes a battery at 26.7 °C(80 °F) can be discharged at 25 amps and maintain a voltage of 10.5 volts for a 12 volt battery.

The higher the reserve rating, the longer your vehicle can operate should your alternator or fan belt fail.

Starting System

Starter

[NON - ISG type]

Item		Specification
Rated voltage		12 V, 0.9 kW
The number of pinion teeth		10
Performance [No-load, 11.5 V]	Ampere	Max. 60 A
	Speed	Min. 5,500 rpm

[ISG type]

Item		Specification
Rated voltage		12 V, 1.3 kW
The number of pinion teeth		11
Performance [No-load, 12 V]	Ampere	Max. 60 A
	Speed	Min. 3,400 rpm

Tightening Torques

Item	N.m	kgf.m	lb-ft
Ignition coil mounting bolt	9.8 ~ 11.8	1.0 ~ 1.2	7.2 ~ 8.7
Spark plug	14.7 ~ 24.5	1.5 ~ 2.5	10.9 ~ 18.1
Condenser & Hanger bracket mounting nut	18.6 ~ 23.5	1.9 ~ 2.4	13.7 ~ 17.4
Alternator mounting upper bolt	19.6 ~ 26.5	2.0 ~ 2.7	14.5 ~ 19.5
Alternator mounting low bolt	29.4 ~ 41.2	3.0 ~ 4.2	21.7 ~ 30.4
Alternator brace mounting bolt	19.6 ~ 26.5	2.0 ~ 2.7	14.5 ~ 19.5
Battery positive (+) terminal tightening nut	7.8 ~ 9.8	0.8 ~ 1.0	5.2 ~ 8.7
Battery negative (-) terminal tightening nut	3.9 ~ 5.9	0.4 ~ 0.6	2.9 ~ 4.3
Battery mounting bracket mounting bolt	8.8 ~ 13.7	0.9 ~ 1.4	6.5 ~ 10.1
Battery tray mounting bolt	8.8 ~ 13.7	0.9 ~ 1.4	6.5 ~ 10.1
Battery sensor cable mounting bolt	26.5 ~ 32.4	2.7 ~ 3.3	19.5 ~ 23.9
Starter mounting bolt	49.0 ~ 63.7	5.0 ~ 6.5	36.2 ~ 47.0