3.
Remove the water pump pulley (A).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Drain the coolant.
(Refer to Cooling System - "Coolant")
Remove the drive belt.
(Refer to Timing System - “Drive Belt”)
Remove the water pump pulley (A).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Remove the water pump assembly (A) with the gasket (B).
Tightening torque:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
Install in the reverse order of removal.
Install a new water pump gasket.
Fill the engine coolant.
(Refer to Cooling System - "Coolant")
Start the engine and check for leaks.
Recheck the coolant level.
