1.
Disconnect the heated oxygen sensor connector (A) and then remove it from the bracket.
Disconnect the heated oxygen sensor connector (A) and then remove it from the bracket.
Detach the rubber hanger (A) from the front muffler.
Remove the front muffler (B).
Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
When installing, replace with new gaskets.
Install in the reveres order of removal.
Remove the heated oxygen sensor.
(Refer to Engine Control / Fuel System - "Heated Oxygen Sensor (HO2S)")
Detach the rubber hangers (A) from the center muffler.
Remove the catalytic converter and the center muffler (B).
When installing, replace with new gaskets.
Install in the reveres order of removal.
Detach the rubber hangers (A) from the main muffler.
Remove the main muffler (B).
When installing, replace with new gaskets.
Install in the reverse order of removal.
