2.
Disconnect the oxygen sensor connector (A).
Disconnect the battery negative terminal.
Disconnect the oxygen sensor connector (A).
Remove the front muffler (A) .
Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
Install in the reverse order of removal.
When installing, replace with new gasket.
Remove the catalytic converter & center muffler (A).
Tightening torque :
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
Install in the reverse order of removal.
When installing, replace with new gasket.
Detach the rubber hangers (A) from the rear muffler.
Remove the rear muffler (B).
Tightening torque :
39.2 ~ 58.9 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)
Install in the reverse order of removal.
When installing, replace with new gasket.
