2.
Remove the air duct (A).
Disconnect the battery negative terminal.
Remove the air duct (A).
Separate the filler neck (A) from the radiator upper member assembly.
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Disconnect the radiator reservoir hose (A).
Remove the hood lower latch.
(Refer to Body - "Hood Latch")
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
Remove the headlamps.
(Refer to Body Electrical System - "Head Lamps")
Remove the radiator upper member assembly (A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
Disconnect the cooling fan connector (A).
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - “Engine Room Under Cover”)
Drain the coolant.
(Refer to Cooling System - "Coolant")
Disconnect the radiator upper hose (A) and lower hose (B).
Remove the air guards (A).
[RH]
[LH]
Remove the A/C pipe bracket mounting bolt (A).
Separate the condenser from the radiator. (With A/C)
Pull the radiator (A) upward and remove it from engine room.
Remove the cooling fan assembly (A) from the radiator.
Tightening torque :
4.9 ~ 7.9 N.m (0.5 ~ 0.8 kgf.m, 3.6 ~ 5.8 lb-ft)
Install in the reverse order of removal.
Fill the radiator with coolant.
(Refer to Cooling System - "Coolant")
Start engine and check for leaks.
