4.
Remove the rear oil seal(A).
Remove the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
(Refer to Automatic Transaxle System - "Automatic Transaxle")
MT : Remove the flywheel.
(Refer to Cylinder Block - "Flywheel")
AT : Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
Remove the rear oil seal(A).
Install the rear oil seal.
Apply engine oil to a new oil seal lip.
Using the SST (09231-H1100, 09231-2B200) and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.
MT : Install the flywheel.
(Refer to Cylinder Block - "Flywheel")
AT : Install the drive plate.
(Refer to Cylinder Block - "Drive Plate")
Install the transaxle assembly.
(Refer to Manual Transaxle System - "Manual Transaxle")
(Refer to Automatic Transaxle System - "Automatic Transaxle")
