3.
Remove the cold start solenoid valve (C) after removing the mounting bolt.
Turn ignition switch OFF
Disconnect CSSV connector.
Supply battery voltage to the cold start solenoid valve terminals 1 and 2.
Check operating of the solenoid valve normally.
Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the cold start solenoid valve connector (A) and the fuel feed hose (B).
Remove the cold start solenoid valve (C) after removing the mounting bolt.
Install in the reverse order of removal.
Cold start solenoid valve bracket mounting bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)
