[Motor Resistance]
Turn ignition switch OFF.
Disconnect the variable swirl actuator connector.
Check that swirl valve is stuck by foreign material.
Measure resistance between No.1 and No.2 terminal of position sensor.
Check that the resistance is within the specification.
Item | Specification |
Coil Resistance (Ω) | 3.4 ~ 4.4 [20℃(68℉)] |
[Feedback Position Sensor Resistance]
Turn ignition switch OFF.
Disconnect the variable swirl actuator connector.
Check that swirl valve is stuck by foreign material.
Measure resistance between No.3 and No.5 terminal of position sensor.
Check that the resistance is within the specification.
Item | Specification |
Coil Resistance (Ω) | 3.44 ~ 5.16 [20℃(68℉)] |
[Feedback Position Sensor Voltage]
Connect the GDS the data link connector.
Perform the fully open and the fully closing operation of the Variable swirl actuator by using the actuation test.
Check that the voltage is within the specification.
Item | Specification |
Output Voltage (V) | 0.17 ~ 4.83 [20℃(68℉)] |
