1.
Install in the reverse order of removal.
note
When installing the high pressure fuel pipes, apply the specified tightening torques with the special service tools (Refer to the below table).
Item | Dimension | Tool Name |
Flange Nut (Injector Side) | 14 mm (0.551 in) | 09314-27110 |
Flange Nut (HP Pump Side) | ||
Flange Nut (CommonRail Side) | 17 mm (0.669 in) | 09314-27120 |
note
If it is difficult to use the special service tools 09314-27110 or 09314-27120 for tightening some of the high pressure fuel pipe flange nuts to the specified torque, you can use a spanner torque wrench as shown below.
