4.
Remove the valve (C) from the surge tank.
Turn the ignition switch OFF.
Disconnect the VIS valve connector.
Measure resistance between VIS valve terminals 1 and 2.
Specification: Refer to "Specification"
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
Disconnect the variable intake solenoid valve connector (A).
Disconnect the vacuum hoses (B) from the valve.
Remove the valve (C) from the surge tank.
Install the component with the specified torques.
Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
Use care to keep foreign material out of the valve.
Install in the reverse order of removal.
