3.
Remove the mounting nuts (B).
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
Disconnect the accelerator position sensor connector (A).
Remove the mounting nuts (B).
Remove the cap (A)
Remove the mounting bolt (A), and then remove the accelerator pedal module.
Install in the reverse order of removal.
Accelerator pedal module mounting nut:
12.8 ~ 15.7 N.m (1.3 ~ 1.6 kgf.m, 9.4 ~ 11.6 lb-ft)
Accelerator pedal module mounting bolt:
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
