2.
Loosen the guide rod bolt (B) and pivot the caliper body (A) up out of the way.
Remove the front wheel ＆ tire.
Loosen the guide rod bolt (B) and pivot the caliper body (A) up out of the way.
Replace pad shim (D), pad retainers (C) and brake pads (B) in the caliper carrier (A).
Compress the piston into the caliper body using the SST (09581-11000).
Place the caliper body (A) on the caliper carrier and tighten the guide rod bolt (B).
Tightening torque :
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
Install the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
