Removal
note

The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure.

1.

Release the parking brake lever and parking brake cable is loose.

2.

Remove the rear console cover (A).

3.

Loosen the adjusting nut (A) and the parking brake cables (B).

note

Parking brake lever in the car must be in fully loosened position.

4.

Raise the vehicle, and make sure it is securely supported.

5.

Remove the rear tire and wheel.

6.

Remove the parking brake cable (A), after removing the clip (B).

7.

Loosen the parking brake cable bracket bolts and remove the parking brake cable (A).

Яндекс.Метрика