2.
Remove the rear heating joint duct (A).
Remove the floor console assembly.
(Refer to Body - "Floor Console")
Remove the rear heating joint duct (A).
Remove the shift cable (A) from the shift lever assembly.
Remove the retainer (A) by loosening the nuts (B).
Tightening torque:
11.8 ~ 14.7 N.m (1.2 ~1.5 kgf.m, 8.7 ~ 10.8 lb-ft)
Remove the air cleaner assembly and air duct.
(Refer to Engine Mechanical System - "Air cleaner")
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the shift cable from the transaxle.
Remove the nut (C) from the manual control lever.
Tightening torque:
9.8 ~ 13.7 N.m (1.0 ~1.4 kgf.m, 7.2 ~ 10.8 lb-ft)
Remove the cable (B) from the bracket (A).
Remove the shift cable by pulling it toward the interior.
Install in the reverse order of removal.
Install the cable after placing the shift lever and the transaxle manual control lever in the N position.
