13577821

caution

If the oil seal on the transaxle is damaged and fluid is leaking, replace the oil seal with a new unit. When installing the new oil seal, use the specialized tool (oil seal installer: 09452-26100).

note

Perform the procedures below after replacing the automatic transaxle.

●

Refill the automatic transaxle with fluid.

(Refer to Hydraulic System - "Fluid")

●

Clear the diagnostic trouble codes (DTC) using the GDS. Even though disconnecting the battery negative terminal, the DTCs will not be cleared. So, be sure to clear the DTCs using the GDS.

●

Reset the automatic transaxle adaptive values using the GDS.

●

Perform the TCM adaptive values learning procedure.

(Refer to Automatic Transaxle Control System - "Repair procedures")