2.
After loosening the mounting bolt, then remove the front door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the hole plug (A).
After loosening the mounting bolt, then remove the front door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the front door outside handle (A) by sliding it rearward.
Disconnect the front door outside handle connector (A).
Install in the reverse order of removal.
Be sure to install the outside handle pad (A) onto between the outside handle and the door panel.
Make sure the connector is connected properly.
Make sure the door locks/unlocks and opens/closes properly.
