3.
After loosening the mounting bolt, then remove the rear door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
Remove the hole plug (A).
After loosening the mounting bolt, then remove the rear door outside handle cover (B).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Remove the rear door outside handle (A) by sliding it rearward.
Install in the reverse order of removal.
Be sure to install the outside handle pad (A) onto between the outside handle and the door panel.
Make sure the door locks/unlocks and opens/closes properly.
