1.
Open the roller blind using the panorama sunroof switch.
caution
●
Leave 10 ~ 20cm (0.3937 ~ 0.7874 in) of the roller blind unopened.
Open the roller blind using the panorama sunroof switch.
Leave 10 ~ 20cm (0.3937 ~ 0.7874 in) of the roller blind unopened.
Remove the roof trim.
(Refer to Roof Trim - "Roof Trim Assembly")
Remove the roller blind bar (C) by pressing the top part of the lock pin (B) located on the both sides of the roller blind shoe (A).
Put a fixed pin (B) into the hole located inside the groove of the right side roller blind side bracket (A). Becareful not to release tension.
Remove the roller blind lower support (A) by loosening the mounting screws.
