13578779

1.

Install the roller blind side bracket (A) fit into the guide groove (B).

2.

Tighten the mounting screws after installing the roller blind lower support (A).

3.

Remove the fixed pin (B) located inside the right side roller blind side bracket (A).

4.

Install the roller blind bar (A) on top of the roller blind shoe (B).

5.

Put the roller blind bar (A) into the roller blind shoe (B).

6.

Install the roof trim.

7.

Completely close the movable glass using the panorama sunroof switch.

caution

●

Roller blind tension adjustment

(1)

Put a fixed pin (B) into the hole located inside the groove of the right side roller blind side bracket (A). Becareful not to release tension.

(2)

Remove the roller blind lower support.

(3)

Press the lock pin (A) and then remove the push the roller blind (B) in the direction of the arrow.

(4)

Remove the roller blind (A) from the roller blind support bracket (B).

(5)

Remove the fixed pin (B) from inside the groove of the right side roller blind side bracket (A).

caution

●

Be careful not to injure your hand when the roller blind side bracket tension gets releases.

(6)

Rotate the roller fabric (B) while holding the roller fabric side bracket (A).

caution

●

Be careful not to injure your hand when the roller blind side bracket tension gets releases.

caution

●

Rotate it 12 times clockwise.

(7)

Put a fixed pin (B) into the hole located inside the groove of the right side roller blind side bracket (A). Becareful not to release tension.

(8)

Install the roller blind on the roller blind support bracket.