1.
Detach the rear seat belt lower anchor (C) by pushing the lock pin (B) of center mini buckle (A) with flat-tip driver.
Detach the rear seat belt lower anchor (C) by pushing the lock pin (B) of center mini buckle (A) with flat-tip driver.
Fold the rear seat back assembly.
Remove the center hinge cover (A).
Loosen the rear seat back mounting bolt (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
Remove the rear seat back assembly (A).
Install in the reverse order of removal.
Remove the trunk trim.
Remove the luggage cover board (A).
Remove the luggage box (A).
Loosen the rear seat cushion mounting bolt (A).
Tightening torque :
16.7 ~ 25.5N.m (1.7 ~ 2.6kgf.m, 12.3~18.8lb-ft)
Remove the rear seat cushion assembly (A) by pushing it up.
Disconnect the heater cushion connector (A).
[LH]
[RH]
Install in the reverse order of removal.
