Refer to Smart key System - "Smart key Diagnostic"

Refer to Smart key System - "Smart key Diagnostic"

Refer to Smart key System - "Smart key Diagnostic"

Check for continuity between teh trunk lid open switch terminal.

If continuity is not specified, inspect the switch.

Disconnect the negative (-) battery terminal.

Remove the main crash pad assembly.

(Refer to Body - "Main Crash Pad Assembly")

Loosen the mounting bolts and nut from the smart key unit bracket.

Remove the smart key unit (B) after disconnecting the connector (A) from the smart key unit.

Disconnect the negative(-) battery terminal.

Remove the floor console assembly.

(Refer to Body - "Floor Console Assembly")

Disconnect the connector (A) from the interior antenna.

Remove the interior antenna (A) after loosening the mounting nuts.

Disconnect the negative (-) battery terminal.

Remove the rear seat cushion assmebly.

(Refer to Body - "Rear Seat Assembly")

Remove the interior antenna 2 (A). (in the order as below)

(1)

Disconnect the connector (A) from the interior antenna 2.

(2)

Remove the interior antenna 2 (A) after loosening the mounting nuts.

caution

When removing the interior antenna 2, the rear seat back assembly dosen't remove.

Disconnect the negative(-) battery terminal.

Remove the rear bumper cover.

(Refer to Body - "Rear Bumper Cover")

Disconnect the connector (A), then remove the rear bumper antenna (B) with loosening the mounting screws.

Disconnect the negative(-) battery terminal.

Remove the front left wheel guard.

Remove the buzzer (B) after disconnecting the connector (A).

Disconnect the negative (-) battery terminal.

Remove the front door module.

(Refer to Front Door - "Front Door Module")

Remove the hole plug (A).

After loosening the mounting bolt, then remove the front door outside handle cover (B).

Remove the front door outside handle (A) by sliding it rearward.

Disconnect the negative (-) battery terminal.

Remove the tailgate trim.

(Refer to Body - "Tail Gate Trim")

Disconnect the tailgate open switch connector (A).

Remove the tailgate switch (A).

Install the smart key unit.

Connect the connector and install the smart key unit.

Install the main crash pad assembly.

Install the negative (-) battery terminal and check the smart key system.

Install the interior antenna.

Install the floor console assembly.

Install the negative (-) battery terminal and check the smart key system.

Install the interior antenna 2.

Install the rear seat cushion assembly.

Install the negative (-) battery terminal and check the smart key system.

Install the exterior bumper antenna.

Install the rear bumper cover.

Install the negative (-) battery terminal and check the smart key system.

Install the buzzer.

Install the front left wheel guard.

Install the negative (-) battery terminal and check the smart key system.

Install the door outside handle.

Install the door trim.

Install the negative (-) battery terminal and check the smart key system.

Install the tailgate open switch.

Install the tailgate trim.

Install the negative (-) battery terminal and check the smart key system.