3.
Check that the motor operates normally. Replace the motor if it operates abnormally.
No. | Description |
1 | Battery (+) |
2 | Parking |
3 | Ground |
4 | Signal |
Remove the connector from the rear wiper motor.
Connect battery positive (+) and negative (-) cables to terminals 2 and 1 respectively.
Check that the motor operates normally. Replace the motor if it operates abnormally.
No. | Description |
1 | Battery (+) |
2 | Parking |
3 | Ground |
4 | Signal |
Operate the motor at low speed using the stalk control.
Stop the motor operation anywhere except at the off position by disconnecting terminal 2.
Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1.
Check that the motor stops running at the off position.
