The SRSCM sets DTC B136700 when resistance of BPT circuit is greater than 7.2Ω or there is opened circuit between low circuit and high circuit.
※ SRSCM checks if there's any fault in circuit by sending current for a while.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Resistance | 1. Poor connection of connected part. 2. Poor connection between shorting bar and release pin 3. Faulty Pretensioner Front-Passenger 4. Check SRSCM | |
Enable Conditions |
•
Ignition Switch "ON" | ||
Threshold Value |
•
Pretensioner Front-Passenger resistance > 7.2Ω | ||
Diagnostic Time | Qualification |
•
1sec | |
De-Qualification |
•
2sec | ||
