The SRSCM sets DTC B173400 if the measured resistance value of Anchor Pretensioner-Passenger circuit is more than the threshold value.
※ In this case, SRSCM checks if there's any fault in circuit by sending current for a while.
Item | Detecting Condition | Possible cause | |
DTC Strategy |
•
Check Resistance | 1. Poor connection of connected part. 2. Poor connection between shorting bar and release pin. 3. Faulty Anchor Pretensioner Front-Passenger. 4. Check SRSCM. | |
Enable Conditions |
•
Ignition Switch "ON" | ||
Threshold Value |
•
Anchor Pretensioner Front-Passenger > 7.2Ω | ||
Diagnostic Time | Qualification |
•
1sec | |
De-Qualification |
•
2sec | ||
