This code is set when the Rear LH turn signal lamp circuit is shorted to ground while the LH turn signal lamp is operating.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Load Mornitoring | 1. Poor connection 2. Short to ground in Rear LH turn signal lamp circuit 3. Faulty Rear LH turn signal lamp 4. Faulty SJB |
Enable Conditions |
•
IG KEY ON. | |
Threshold Value |
•
Rear LH turn signal lamp circuit is shorted to ground | |
Diagnostic Time |
•
It immediately sets DTC after fault detects. | |
DTC Erasing Time |
•
-Present Failure : IGN SW OFF or T/SIG LH, HAZARD SW OFF after fault has been fixed.
•
-Memorized Failure : DTC can be erased immediately with GDS. |
