P2016 is set when variable swirl valve position sensor output voltage below 132mV is detected for more than 2.5 sec. This code is due to open in power circuit or short to ground in signal circuit.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Circuit monitoring | 1. VSA actuator short to power 2. VSA actuator short to ground 3. Faulty VSA | |
Enable Conditions |
•
IG "ON" & Engine "ON" | ||
Threshold Value |
•
Output voltage below minimum value( below 132mV ) | ||
Fail Safe | Fuel Cut |
•
NO | |
EGR Off |
•
NO | ||
Fuel Limit |
•
NO | ||
Check Lamp |
•
NO | ||
