This DTC sets when the accelerator pedal sensor 1 (APS1) is out of range low.
Item | Detecting Condition | Possible Cause |
DTC Strategy |
•
Electrical Check (PVS_1) | 1. Poor connection 2. Open or short to ground in signal circuit 3. Faulty APS |
Enable Conditions |
•
Pedal Sensor2 voltage > 0.55V | |
Threshold Value |
•
Pedal sensor1 voltage < 0.31V | |
Diagnostic Time |
•
Continuous | |
MIL On Condition |
•
1 driving cycles |
