5.
IIs the measured Value within specification?
 | ▶ Go to "Verification of Vehicle Repair" procedure. |
 | ▶ If no problems were found with the circuits or connectors, Replace the Clutch Switch. |
IG "ON" and keep the clutch taking off.
Measure voltage between Pin No.1(signal) terminal of clutch switch harness connector and chassis ground.
Specification : Clutch Switch - Approx 8.5V
Keep the clutch stepping on.
Measure voltage between Pin No.1(signal) terminal of clutch switch harness connector and chassis ground.
Specification : Clutch Switch - Approx 0V
Item | During taking off the Clutch | During stepping on the Clutch |
Clutch Switch(IG On) | Approx. 8.5V | 0V |
IIs the measured Value within specification?
| ▶ Go to "Verification of Vehicle Repair" procedure. |
| ▶ If no problems were found with the circuits or connectors, Replace the Clutch Switch. |
