If the intake manifold pressure is lower than the minimum threshold value or higher than the maximum threshold value, the ECM/PCM sets DTC P0106.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Compare with model | 1. Poor connection 2. MAPS | |
Enable Conditions |
•
Time elapsed after start > 1 sec.
•
No TPS error detected
•
No CVVT error detected
•
No signal error detected | ||
Threshold Value | Case 1 |
•
Difference of MAP and Model MAP (High side) greater than Max Threshold . | |
Case 2 |
•
Diffrence of MAP and Model MAP (Low side) less than Min Threshold . | ||
Case 3 |
•
Measured intake manifold pressure stuck | ||
Diagnostic Time |
•
5 sec. | ||
MIL ON Condition |
•
3 driving cycles | ||
