P0335 is set when the CMPS signal is output while the CKPS signal does not generate. This code is due to the CKPS circuit or component failure. If the CKPS signal is not input during driving, RPM is calculated based on the CMPS signal.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
CKPS signal monitoring | 1. CKPS circuit 2. Faulty CKPS 3. Tone wheel | |
Enable Conditions |
•
Engine "ON" | ||
Threshold Value |
•
The CKPS signal is not input during driving | ||
Fail Safe | Fuel Cut |
•
NO | |
EGR Off |
•
NO | ||
Fuel Limit |
•
NO | ||
Check Lamp |
•
YES | ||
