If Error signal of neutral gear switch is detected for certain amount of time, ECM sets DTC P082000. This fault might be caused by open or short to power/ground in signal circuit of neutral gear switch.
Item | Detecting Condition | Possible Cause | |
DTC Strategy |
•
Signal monitoring | 1. Open or short to power/ground in signal circuit of neutral gear switch 2. Faulty neutral gear switch | |
Enable Conditions |
•
Driving condition | ||
Threshold Value |
•
Neutral gear switch signal is not detected | ||
Fail Safe | MIL |
•
Off | |
ISG OFF |
•
Yes |