2.
Disconnect the vacumm hose (A).
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the vacumm hose (A).
Remove the harness mounting bolts.
Remove the control wiring harness (A) after disconnect the vacumm hose and connector.
Remove the control harness mounting bracket (A) after loosening the bolt.
Remove the heat protector (A) after loosening the bolts.
Disconnect the glow plug connector (A).
Remove the glow plug plate (B) after loosening the mounting nuts (A).
Glow plug plate mounting nut :
0.78 ~ 1.47 N.m (0.08 ~ 0.15 kgf.m, 0.58 ~ 1.09 lb-ft)
Remove the glow plug (A) from the engine.
Glow plug plate mounting nut :
15.0 ~ 20.0 N.m (1.5 ~ 2.0 kgf.m, 11.0 ~ 14.8 lb-ft)
