3.
Install the jack to the edge of oil pan to support the engine.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover")
Install the jack to the edge of oil pan to support the engine.
Remove the engine mounting support bracket (A).
Tightening torque
Nut (B) :
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)
Bolt (C), Nuts (D) :
58.8 ~ 73.5 N.m (6.0 ~ 7.5 kgf.m, 43.4 ~ 54.2 lb-ft)
Remove the idler (#1) (A).
Tightening torque :
24.5 ~ 34.3 N.m (2.5 ~ 3.5 kgf.m, 18.1 ~ 25.3 lb-ft)
Remove the idler (#2) (A).
Tightening torque :
24.5 ~ 34.3 N.m (2.5 ~ 3.5 kgf.m, 18.1 ~ 25.3 lb-ft)
Install in the reverse order of removal.
