1.
Install the LH camshaft (A) and the RH camshaft (B).
Install the LH camshaft (A) and the RH camshaft (B).
Install the camshaft bearing caps (A).
Tightening torque :
12.7 ~ 14.7 N.m (1.3 ~ 1.5 kgf.m, 9.4 ~ 10.8 lb-ft)
Install the camshaft sprocket and tighten the bolt to the specified torque.
Temporarily install the camshaft sprocket bolt.
Hold the portion of the camshaft with a hexagonal wrench (A), and tighten the bolt with a wrench (B).
Tightening torque :
68.6 ~ 73.5 N.m (7.0 ~ 7.5 kgf.m, 50.6 ~ 54.2 lb-ft)
Install the vacuum pump (A) with new gasket (B).
Tightening torque :
10.8 ~ 14.7 N.m (1.1 ~ 1.5 kgf.m, 8.0 ~ 10.8 lb-ft)
Apply engine oil to the O-ring (A) of vacuum pump shaft before assembling vacuum pump.
Install the other parts in the reverse order of removal.
