Installation
note

Install the component with the specified torques.

Note that internal damage may occur when the component is dropped. In this case, use it after inspecting.

note

Be careful not to damage the sensing element and the honey cell.

1.

Install in the reverse order of removal.

Mass air flow sensor mounting bolt:

3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Mass air flow sensor clamp mounting screw:

2.9 ~ 4.9 N.m (0.3 ~ 0.5 kgf.m, 2.2 ~ 3.6 lb-ft)

Яндекс.Метрика