3.
Remove the fuel pump service cover (A).
Turn ignition switch OFF and disconnect the battery negative (-) terminal.
Remove the rear seat cushion assembly.
(Refer to Body - "Rear Seat Assembly")
Remove the fuel pump service cover (A).
Disconnect the fuel sender connector (A).
Disconnect the fuel feed tube quick-connector (B) and fuel raturn tube quick-connector (C).
Lift the vehicle and support the fuel tank with a jack.
Disconnect the fuel filler hose (A) and the leveling hose (B).
Remove the parking brake cable RH bracket mounting bolts (A) to obtain space for removing the fuel tank.
Remove the fuel tank (A) from the vehicle after removing the fuel tank band.
Install in the reverse order of removal.
Fuel tank band mounting nut:
39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)
After removing or replacing the part below, bleed air in low pressure fuel circuit.
(Refer to Fuel Delivery System - "Bleeding air in low pressure fuel circuit" )
Fuel Tank
Fuel Sender
Fuel Filter
High Pressure Fuel Pump
Low Pressure Fuel Lines
