1.
Install in the reverse order of removal.
note
When installing the high pressure fuel pipes, apply the specified tightening torques with the special service tools (Refer to the below table).
Item | Dimension | Tool Name |
Flange Nut (HP Pump Side) | 14 mm | 09314-27110 |
Flange Nut (CommonRail Side) | 17 mm | 09314-27120 |
caution
If it is difficult to use the special service tools 09314-27110 or 09314-27120 for tightening some of the high pressure fuel pipe flange nuts to the specified torque, you can use a spanner torque wrench as shown below.
note
After removing or replacing the part below, bleed air in low pressure fuel circuit.
(Refer to Fuel Delivery System - "Bleeding Air in Low Pressure Fuel Circuit")
-
Fuel Tank
-
Fuel Sender
-
Fuel Filter
-
High Pressure Fuel Pump
-
Low Pressure Fuel Lines
