4.
Disconnect the vacuum hose (A) from the brake booster.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
Remove the master cylinder.
(Refer to Brake System - "Master cylinder")
Disconnect the vacuum hose (A) from the brake booster.
Disconnect the vacuum pressure sensor connector (A) from the brake booster.
Remove the snap pin (A) and clevis pin (B).
Remove the brake booster mounting nuts (A).
Tightening torque :
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Remove the brake booster (A).
