1.
Remove the shift lever knob & boots assembly (A) by Pulling in the upside.
Remove the shift lever knob & boots assembly (A) by Pulling in the upside.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
Remove the rear heating joint duct (A).
Disconnect the shift lever main connector.
Remove the wiring (A) from the shift lever assembly.
Remove the shift cable (A) from the shift lever assembly.
Remove the shift lever aseembly (A) by removing the bolts.
Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Install in the reverse order of removal.
When installing, set room side shift lever and T/M side lever to "N" position.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
Remove the shift lock solenoid (A) from the shift lever assembly.
Disconnect the wiring (B) of shift lock solenoid from the main connector (A).
Install in the reverse order of removal.
