Troubleshooting

Trouble symptom

Probable cause

Remedy

Warning lamp "E" is illuminated

(Driving is only possible with 1/ R gear)

DCT learning not performed

Perform the DCT manual learning procedure.

Driving impossible at odd gear

Clutch actuator (Clutch motor 1 or position sensor 1 is faulty)

Replace the clutch actuator assembly.

Gear actuator (Shift motor 1, position sensor 1, select solenoid 1 or position sensor 1 is faulty)

Replace the gear actuator assembly.

Input speed sensor 1 is faulty

Replace the input speed sensor.

Faulty gears (1, 3, 5, 7)

Replace the gear.

Faulty clutch 1

Replace the dual clutch assembly.

Faulty clutch engagement bearing 1

Replace the clutch engagement bearing

Driving impossible at even gear

Clutch actuator (Clutch motor 2 or position sensor 2 is faulty)

Replace the clutch actuator assembly.

Gear actuator (Shift motor 2, position sensor 2, select solenoid 2 or position sensor 2 is faulty)

Replace the gear actuator assembly.

Input speed sensor 2 is faulty

Replace the input speed sensor.

Faulty gears (2, 4, 5, 6 , R)

Replace the gear.

Faulty clutch 2

Replace the dual clutch assembly.

Faulty clutch engagement bearing 2

Replace the clutch engagement bearing

Driving impossible 

Faulty TCM

Replace the TCM.

Simultaneous failure of odd & even systems

Replace the dual clutch assembly or gear.

Simultaneous failure of inhibitor switch & shift lever sensor

Replace the inhibitor switch.

Manual mode disabled

Faulty inhibitor switch

Replace the inhibitor switch.

Faulty shift lever sensor

Replace the shift lever.

Faulty manual mode switch

Replace the manual mode switch housing.

Noise

Oil level (Low)

Refill the transmission with oil after inspecting the parts (oil, seal, drain plug, and filler plug).

Oil (Wrong type)

Replace the oil.

Synchronizer ring (Worn or damaged)

Replace the synchronizer ring.

Gear (Worn or damaged)

Replace the gear.

Bearing (Worn or damaged)

Replace the bearing.

Oil leakage

Oil level (High)

Inspect the oil level.

Gasket (Damaged)

Replace the gasket.

Oil seal (Worn or damaged)

Replace the oil seal.

Hard shifting or impossible to shift

Oil (Wrong type)

Replace the oil.

Shift fork (Worn)

Replace the shift fork.

Synchronizer ring (Worn or damaged)

Replace the synchronizer ring.

Gear (Worn or damaged)

Replace the gear.

Hub sleeve (Worn or damaged)

Replace the hub sleeve.

Яндекс.Метрика