1.
Remove the shift lever knob & boots assembly (A) by pulling it out.
Remove the shift lever knob & boots assembly (A) by pulling it out.
Remove the floor console assembly.
(Refer to Body - "Floor Console")
Remove the rear heating joint duct (A).
Disconnect the shift lever main connector.
Remove the wiring (A) from the shift lever assembly.
Remove the shift cable (A) from the shift lever assembly.
Remove the shift lever aseembly (A) by removing the bolts.
Tightening torque :
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Install in the reverse order of removal.
When installing, set room side shift lever and T/M side lever to "N" position.
