1.
Rotating counter-clockwise shift lever knob (A).
Rotating counter-clockwise shift lever knob (A).
Remove the floor console assembly.
(Refer to Body - "Floor Console")
Remove the rear heating joint duct (A).
Remove the bracket (A).
Remove the select cable (B) after removing the snap pin (A).
Remove the cable socket (C) from lever assembly after pulling in the direction of the arrow.
Remove the shift cable (B) after removing the clip (A).
Remove the cable socket (A) from lever assembly after pulling in the direction of the arrow.
Remove the shift lever assembly (B) by removing the bolts (A).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)
Install in the reverse order of removal.
When installing, set room side shift lever and T/M side lever to "N" position.
Check operating of lever of T/M side when operating shift lever after assembly.
When shift lever to "R" position, check the position of "skirt".
