1.
Remove the clutch pedal mounting nuts (A).
Remove the clutch pedal mounting nuts (A).
Separate the push rod (C) after remove the pin (A) and washer (B).
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 1.6 MPI (Refer to Engine Mechanical System - "Air Cleaner")
F 1.6 MPI (Refer to Engine Mechanical System - "Air Cleaner")
G 2.0 MPI (Refer to Engine Mechanical System - "Air Cleaner")
D 1.6 TCI (Refer to Engine Mechanical System - "Air Cleaner")
Remove the battery and battery tray.
G 1.6 GDI (Refer to Engine Electrical System - "Battery")
G 1.6 MPI (Refer to Engine Electrical System - "Battery")
F 1.6 MPI (Refer to Engine Electrical System - "Battery")
G 2.0 MPI (Refer to Engine Electrical System - "Battery")
D 1.6 TCI (Refer to Engine Electrical System - "Battery")
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.
Install in the reverse order of removal.
After be equipped, perform bleeding air procedure in clutch release cylinder after pouring the brake fluid.
(Refer to Clutch System - "Clutch release cylinder")
