3.
Disconnect the pressure side impact sensor connector (A) and remove the pressure side impact sensor mounting screws (B).
Removal of the airbag must be performed according to the precautions / procedures described previously.
Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
Remove the front door trim.
(Refer to Body - "Front door trim")
Disconnect the pressure side impact sensor connector (A) and remove the pressure side impact sensor mounting screws (B).
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
To remove the semergency fastening device (C), keep on pushing the lock pin (A) as arrow direction. And then remove the seat belt after pushing the lock pin (B).
Remove the center pillar lower trim.
(Refer to Body - "Center pillar trim")
Disconnect the side impact sensor connector (A).
Loosen the side impact sensor mounting bolt and then remove the side impact sensor (B).
